Toll Free: 866-444-9990
Español: 844-871-5153
Local: 319-213-9180
Hours: M-F, 7am - 5pm CST
This versatile 22-pc. kit can be anchored just where you need them in your trailer or pickup truck bed to secure motorcycles, ATVs, snowmobiles, etc. Simply fasten the 2" aluminum L- track pieces (fasteners included) to your desired locations and snap the single stud fittings into the track. Each track piece has two pre-drilled holes for fast and easy installation. Anchors and stud fittings are finished with black powder coat paint.
Package includes:
Need a kit with tie down straps? See our Black 4-Point Tie Down System.
Due to the many variables involved in installing L-track anchor points - such as the mounting surface - we cannot provide a blanket working load limit. They are designed to be at least as strong as any of the included single stud fittings we sell to use with it, but it is up to the installer to determine that they are properly installed to provide sufficient strength. If you need assistance with this, consult your trailer manufacturer for installation suggestions. For more information, please refer to WSTDA T-5 section 3.4.
For more information on how to use and install L-track (including video demonstrations!), see our How to Use and Install L-Track and L-Track Systems page.
California Residents: WARNING
Excellent product..Fast delivery
I used these for my Side By side in an enclosed trailer. They seemed secure but they broke on the first use and my side by side was not tied down in the trailer. It slid around and made it very difficult to unload as it was jammed in the corner behind the ramp door. It took about 45 minutes to actually get the Machine out. I love the quality of the pieced and if you have a light load I would reccomend it. But anything with any weight I would get the larger tracks. i thikn they would provide a better tie down point.
These are versatile for sure. They ultimately did what I needed. That being said, ive found stainless hardware to be worthless in the real world. The provided hardware should be allen key head with lock nuts.
Thanks